PHP 8.3.4 Released!

session_regenerate_id

(PHP 4 >= 4.3.2, PHP 5, PHP 7, PHP 8)

session_regenerate_id Remplace l'identifiant de session courant par un nouveau

Description

session_regenerate_id(bool $delete_old_session = false): bool

session_regenerate_id() va remplacer l'identifiant de session courant par un nouveau, généré automatiquement, tout en conservant les valeurs de session.

Lorsque l'option session.use_trans_sid est active, la sortie pour affichage doit commencer après l'appel à la fonction session_regenerate_id(). Sinon, l'ancien ID de session sera utilisé.

Avertissement

Actuellement, session_regenerate_id ne gère pas bien un réseau instable. Par ex. réseau mobile et WiFi. Par conséquent, vous pouvez rencontrer une perte de session en appelant session_regenerate_id.

Vous ne devez pas détruire les anciennes données de session immédiatement, mais devez utiliser l'horodatage de destruction et contrôler l'accès à l'ancien ID de session. Sinon, l'accès simultané à la page peut entraîner un état incohérent, ou vous avez peut-être perdu la session, ou il peut provoquer un accès concurrent côté client (navigateur) et peut créer de nombreux ID de session inutilement. La suppression immédiate de données de session désactive également la détection et la prévention d'attaque de détournement de session.

Liste de paramètres

delete_old_session

Si l'on doit effacer l'ancien fichier de session associé ou pas. Vous ne devez pas supprimer l'ancienne session si vous avez besoin d'éviter les accès concurrents causés par la suppression ou de détecter/éviter les attaques de détournement de session.

Valeurs de retour

Cette fonction retourne true en cas de succès ou false si une erreur survient.

Exemples

Exemple #1 Exemple avec session_regenerate_id()

<?php
// Note: ce code ne fonctionne pas complètement, c'est un exemple!

session_start();

// Vérifier l'horodatage de destruction
if (isset($_SESSION['destroyed'])
&&
$_SESSION['destroyed'] < time() - 300) {
// Ne devrait pas se produire habituellement. Cela pourrait être une attaque
// ou en raison d'un réseau instable. Supprimez tout l'état d'authentification
// de cette session utilisateurs.
remove_all_authentication_flag_from_active_sessions($_SESSION['userid']);
throw(new
DestroyedSessionAccessException);
}


$old_sessionid = session_id();

// Définir l'horodatage de déstruction
$_SESSION['destroyed'] = time(); // session_regenerate_id () enregistre les anciennes données de session

// Il suffit d'appeler session_regenerate_id() peut entraîner la perte de session, etc.
// Voir l'exemple suivant.
session_regenerate_id();

// La nouvelle session n'a pas besoin du timestamp de destruction
unset($_SESSION['destroyed']);

$new_sessionid = session_id();

echo
"Ancienne Session: $old_sessionid<br />";
echo
"Nouvelle Session: $new_sessionid<br />";

print_r($_SESSION);
?>

Le module de session actuel ne gère pas bien le réseau instable. Vous devez gérer l'ID de session pour éviter la perte de session par session_regenerate_id.

Exemple #2 Eviter la perte de session par session_regenerate_id()

<?php
// Note: ce code ne fonctionne pas complètement, c'est un exemple!
// my_session_start() et my_session_regenerate_id() évitent les sessions perdues
// par le réseau instable. En outre, ce code peut empêcher l'exploitation de
// session volée par les attaquants.

function my_session_start() {
session_start();
if (isset(
$_SESSION['destroyed'])) {
if (
$_SESSION['destroyed'] < time()-300) {
// Ne devrait pas se produire habituellement. Cela pourrait être une
// attaque ou en raison d'un réseau instable. Supprimez tout l'état
// d'authentification de cette session utilisateurs.
remove_all_authentication_flag_from_active_sessions($_SESSION['userid']);
throw(new
DestroyedSessionAccessException);
}
if (isset(
$_SESSION['new_session_id'])) {
// Pas encore complètement expiré. Pourrait être perdu cookie par réseau instable.
// Essayez à nouveau de définir le cookie d'ID de session approprié.
// Remarque: n'essayez pas de redéfinir l'ID de session si vous
// souhaitez supprimer l'état d'authentification.
session_commit();
session_id($_SESSION['new_session_id']);
// Nouvel ID de session doit exister
session_start();
return;
}
}
}

function
my_session_regenerate_id() {
// Le nouvel ID de session est requis pour définir l'ID de session approprié
// lorsque l'ID de session n'est pas défini en raison d'un réseau instable.
$new_session_id = session_create_id();
$_SESSION['new_session_id'] = $new_session_id;

// Définie le timestamp de destruction
$_SESSION['destroyed'] = time();

// Ecrit et ferme la session courante
session_commit();

// Démarre la session avec un nouvel ID
session_id($new_session_id);
ini_set('session.use_strict_mode', 0);
session_start();
ini_set('session.use_strict_mode', 1);

// La nouvelle session n'en a pas besoin
unset($_SESSION['destroyed']);
unset(
$_SESSION['new_session_id']);
}
?>

Voir aussi

add a note

User Contributed Notes 26 notes

up
42
tedivm at tedivm dot com
8 years ago
I wrote the current top voted comment on this and wanted to add something. The existing code from my previous comment generates it's nonces in an insecure way-

<?php
$_SESSION
['nonce'] = md5(microtime(true));
?>

Since "microtime" is predictable it makes brute forcing the nonce much easier. A better option would be something that utilizes randomness, such as-

<?php
bin2hex
(openssl_random_pseudo_bytes(32))
?>
up
40
tedivm at tedivm dot com
15 years ago
I wrote the following code for a project I'm working on- it attempts to resolve the regenerate issue, as well as deal with a couple of other session related things.

I tried to make it a little more generic and usable (for instance, in the full version it throws different types of exceptions for the different types of session issues), so hopefully someone might find it useful.

<?php
function regenerateSession($reload = false)
{
// This token is used by forms to prevent cross site forgery attempts
if(!isset($_SESSION['nonce']) || $reload)
$_SESSION['nonce'] = md5(microtime(true));

if(!isset(
$_SESSION['IPaddress']) || $reload)
$_SESSION['IPaddress'] = $_SERVER['REMOTE_ADDR'];

if(!isset(
$_SESSION['userAgent']) || $reload)
$_SESSION['userAgent'] = $_SERVER['HTTP_USER_AGENT'];

//$_SESSION['user_id'] = $this->user->getId();

// Set current session to expire in 1 minute
$_SESSION['OBSOLETE'] = true;
$_SESSION['EXPIRES'] = time() + 60;

// Create new session without destroying the old one
session_regenerate_id(false);

// Grab current session ID and close both sessions to allow other scripts to use them
$newSession = session_id();
session_write_close();

// Set session ID to the new one, and start it back up again
session_id($newSession);
session_start();

// Don't want this one to expire
unset($_SESSION['OBSOLETE']);
unset(
$_SESSION['EXPIRES']);
}

function
checkSession()
{
try{
if(
$_SESSION['OBSOLETE'] && ($_SESSION['EXPIRES'] < time()))
throw new
Exception('Attempt to use expired session.');

if(!
is_numeric($_SESSION['user_id']))
throw new
Exception('No session started.');

if(
$_SESSION['IPaddress'] != $_SERVER['REMOTE_ADDR'])
throw new
Exception('IP Address mixmatch (possible session hijacking attempt).');

if(
$_SESSION['userAgent'] != $_SERVER['HTTP_USER_AGENT'])
throw new
Exception('Useragent mixmatch (possible session hijacking attempt).');

if(!
$this->loadUser($_SESSION['user_id']))
throw new
Exception('Attempted to log in user that does not exist with ID: ' . $_SESSION['user_id']);

if(!
$_SESSION['OBSOLETE'] && mt_rand(1, 100) == 1)
{
$this->regenerateSession();
}

return
true;

}catch(
Exception $e){
return
false;
}
}

?>
up
12
ei dot rik dot ops dot tad at gmail dot com
7 years ago
In PHP 5.6 (and probably older versions), session_regenerate_id(true) do not trigger a read() call to the session handler for the new session id.

In PHP 7, read() is triggered during session_regenerate_id(true). Nice to know when working with custom session handlers.
up
8
gr at gr5 dot org
12 years ago
If you are trying to maintain 2 active sessions don't use session_regenerate_id(). Especially if the first session is closed and it's time to open the second. Because the session id is cached you also have to explicitly set it the second time.

<?php
session_name
('PHPSESSID'); // redundant - here for clarity
session_start();
// ...do stuff
session_write_close();

// now switch to session 2...
session_name('PHPSESSID_2');
if (isset(
$_COOKIE['phpsessid_2']))
session_id($_COOKIE['phpsessid_2']); // not doing this will simply reopen the first session again
else
session_id(sha1(mt_rand()); // dont use session_regenerate_id() here. Not creating a new id will create two cookies with same session id and same session variables
session_start();
// ... do stuff with session 2
session_write_close();
?>
up
13
ross at kndr dot org
19 years ago
In a previous note, php at 5mm de describes how to prevent session hijacking by
ensuring that the session id provided matches the HTTP_USER_AGENT and REMOTE_ADDR fields that were present when the session id was first issued. It should be noted that HTTP_USER_AGENT is supplied by the client, and so can be easily modified by a malicious user. Also, the client IP addresses can be spoofed, although that's a bit more difficult. Care should be taken when relying on the session for authentication.
up
10
spmtrap at yahoo dot com
12 years ago
`session_regenerate_id` sends a new cookie but doesn't overwrite the value stored in `$_COOKIE`. After calling `session_destroy`, the open session ID is discarded, so simply restarting the session with `session_start` (as done in Ben Johnson's code) will re-open the original, though now empty, session for the current request (subsequent requests will use the new session ID). Instead of `session_destroy`+`session_start`, use the `$delete_old_session` parameter to `session_regenerate_id` to delete the previous session data.

<?php
session_start
();
/* Create a new session, deleting the previous session data. */
session_regenerate_id(TRUE);
/* erase data carried over from previous session */
$_SESSION=array();
?>

To start a new session and leave the old untouched, simply leave out the argument to `session_regenerate_id`.
up
3
babel at nosqamplease sympatico ca
20 years ago
To add to php at 5mm de's comments:

If the session is held over https, it's even better to save the client's cert or ssl session id instead of the hostname or ip, as it's proxy-transparent and more secure.
up
6
php at cny dot de
19 years ago
Also note that REMOTE_ADDR may change on every request if the user comes through a proxy farm. Most AOL-users do.
up
2
k-gun !! mail
7 years ago
Document example is wrong with usage of "session.use_strict_mode" according to RFC (says: "warning error for session_id() when use_strice_mode=1" on https://wiki.php.net/rfc/strict_sessions).

So, this directive affects "session_id()" not "session_start()". So usage must be like this;

<?php
// first set ini
ini_set('session.use_strict_mode', '0');
// and
session_id($sid);

// then
// maybe run this: ini_restore('session.use_strict_mode');

// then go on...
?>

Refs (ctrl+f & use_strict_mode);
https://wiki.php.net/rfc/strict_sessions
https://wiki.php.net/rfc/session-create-id
http://php.net/manual/en/function.session-id.php#119997
up
3
madsen at sjovedyr.dk
20 years ago
I had problems with a proxy changing a visitors session_id-cookie, so he'd get a LOT of errors when visiting my site.
I handled the bogus session-id's like this. (Note: It only works in versions > 4.3.2.)

<?php
// Start a session and suppress error-messages.
@session_start();

// Catch bogus session-id's.
if (!preg_match("/^[0-9a-z]*$/i", session_id())) {

// Output a warning about the messed up session-id.
$error->handleError("WARN", "Your session id is messed up, you might not be able to use some features on this site.");

// Generate a fresh session-id.
session_regenerate_id();
}

// Site contents.
?>

Hope someone can use it.
up
1
Nicolas dot Chachereau at Infomaniak dot ch
18 years ago
Session_destroy() does not only destroy the data associated with the current session_id (i.e. the file if you use the default session save handler), but also the session itself: if you call session_destroy() and then session_regenerate_id(), it will return false, and session_id() won't return anything. In order to manipulate a session after destroying it, you need to restart it.

So in fact, the code mentionned by chris won't work. If you want to destroy the file associated with the old session_id, try the following:
<?php
session_start
();
$old_sessid = session_id();
session_regenerate_id();
$new_sessid = session_id();
session_id($old_sessid);
session_destroy();

//If you don't copy the $_SESSION array, you won't be able to use the data associated with the old session id.
$old_session = $_SESSION;
session_id($new_sessid);
session_start();
$_SESSION = $old_session;
//...
?>

Note: this technique will send 3 Set-Cookie headers (one on each session_start() and one on session_regenerate_id()). I don't think this is a problem, but if it appears to be one, you could either leave it alone and wait for the garbage collector to catch the file associated with the old session, or try to delete the file with unlink().
up
1
Rumour
2 months ago
The code example provided of my_session_regenerate_id() DOES NOT work and DESTROYS all session variables. Plus the second ini_set gives an error.

The code for regenerating (only that part, the rest seems fine) should simply be this:

<?php
function my_session_regenerate_id() {
$new_session_id = session_create_id();

// backup session variables
$keepSession = $_SESSION ;

// add info for users with bad connection not receiving the new session id
$_SESSION['new_session_id'] = $new_session_id;
// Set destroy timestamp
$_SESSION['destroyed'] = time();

// Write and close current session;
session_commit() ;

// Start session with new session ID
ini_set('session.use_strict_mode', 0);
session_id($new_session_id);
session_start();
$_SESSION = $keepSession ;
}
?>
up
0
soapergem at gmail dot com
15 years ago
This can be a very dangerous function if you're not careful about how you handle things, because even though it generates a whole new set of session data, it keeps the old data "open" until the script terminates, locking out any other scripts trying to run concurrently with the old session id.

Recently I came across a situation where I wanted to explicitly pass in a session ID, copy the data from that session into a *new* session, and then continue operating under that new session, thereby allowing other scripts to use the old one concurrently. But I quickly found that these "other scripts" would not execute until the first script finished--even though it had already started a new session--because it kept the old session open.

So if you're trying to copy over session data to a new session to free up the old session for continued, concurrent use, here's some code to ensure nobody's feet get stepped on:

<?php

// get session id of an existing session
$sid = $_GET['sid'];

// start the old session to retrieve $_SESSION data
session_id($sid);
session_start();

// start a new session; this copies the $_SESSION data over
session_regenerate_id();

// hang on to the new session id
$sid = session_id();

// close the old and new sessions
session_write_close();

// re-open the new session
session_id($sid);
session_start();

/* main code here */

?>

This could probably be encapsulated into a function with one parameter as well to save space if it was a repeated thing.
up
0
primenetworkzx at gmail dot com
15 years ago
If you are storing your session data in a database you have to manually update the session_id in the database. The session_set_save_handler() will not do it for you.

function UpdateSessID() {
$old_sess_id = session_id();
session_regenerate_id(false);
$new_sess_id = session_id();

$query = "UPDATE `session_table` SET `session_id` = '$new_sess_id' WHERE session_id = '$old_sess_id'";
mysql_query($query);
}

Be sure to set session_regenerate_id() to FALSE since it's not really necessary to delete the whole record from MySQL and add it again. That's unnecessary overhead. Only changing the id matters.
up
0
dyer85 at gmail dot com
18 years ago
There could be a potential problem with elger at NOSPAM dot yellowbee dot nl's a few posts below. In the code, was used the REQUEST_URI server variable, which, in some cases might already contain the query string. Therefore, always apending '?whatever=foo' would occasionally cause the script to malfunction. I suggest using PHP_SELF, which will not contain the query string after the file.
up
-2
mikebranttx at gmail dot com
6 years ago
Note that in current PHP 7.2 nightly builds example #2 above will not work as shown. You will get following error upon trying to turn strict mode back on after session_start():

"ini_set(): A session is active. You cannot change the session module's ini settings at this time"

I suppose this means that for any session where you perform session ID regeneration or session ID forwarding (from a session for which a recent session ID regeneration was performed to the new session ID). That you will just have to live with strict mode being disabled for the remainder of that active session.

I don't know that this is really a security concern so long as you are following a single-session per request design (i.e. you are not working with multiple concurrent sessions).
up
-2
chris at knowledge dot tee-vee
19 years ago
licp - no, session_regenerate_id() does not destroy any saved session data.

elger, I prefer the following order

[code]
// populate $_SESSION with any previously saved session data for the current session_id
session_start();
...
// delete any saved data associated with current session_id, $_SESSION is not changed
session_destroy();

// change session_id, $_SESSION not altered
session_regenerate_id();
...
// save any $_SESSION data under the current session_id
session_close();
[/code]
up
-1
antomsa at hotmail dot it
2 years ago
<?php

function my_session_regenerate_id() {
...
session_start();
...

unset(
$_SESSION['destroyed']);
unset(
$_SESSION['new_session_id']);
}

?>

Within my_session_regenerate_id(), unset($_SESSION['destroyed']) and
unset($_SESSION['new_session_id']) are useless because session_start() will open an empty session. They would be needed if built-in session_regenerate_id() was called.
up
-4
kgm_india at yahoo dot co dot in
10 years ago
as far as I have understood reading this online notes,

session_name() is the name which is identified as session a through the cookies or http links.

session_id is like a transaction within a session_name() and one session_name may have many session_id

each session_id has the corresponding data stored.

session_id are used in read and write callback under a session_name

whatever it is, first call the
session_name(),
then call session_id ()
and then call start_session()

start_session will open the session_name, then check the session_id called before and use it in the read or write call back for storing or retrieving data

calling start_session() without session_name or session_id will use the default session_name and the default session_id in that order

I hope if the order is followed there should not be any problems.

do not call session_name or session_id after start_session(), if you are specific on using them.

thank you for others note.
up
-6
elger at NOSPAM dot yellowbee dot nl
19 years ago
Take good notice of the new cookie being sent on calling session_regenerate_id on cookie-enabled sessions.
Make sure your page is reloaded otherwise you'll get an "session_destroy(): Session object destruction failed" error. So here are the examples:

Wrong:
<?php
session_start
();
session_regenerate_id();
session_destroy();
?>

Correct-like:
<?php
if (!$_GET['mode']){
session_start();
session_regenerate_id();
header('location: '.$_SERVER['REQUEST_URI'].'?mode=destroy');
} else {
session_start();
session_destroy();
}
?>

I noted this because googleing on the previous mentioned error leads to all kinds of bug reports, but not to the solution. (which is, of course, to read the manual)
up
-5
raido dot aasoja at gmail dot com
13 years ago
A note on lost sessions and trying to fix it with session_regenerate_id:
Make sure that you're not trying to push SimpleXML object to the session. It just won't go without first converting it to array. :)
up
-3
sopel
18 years ago
for php 5.1> user probably worth visiting is http://ilia.ws/archives/47-session_regenerate_id-Improvement.html
up
-6
licp at hotmail dot com
19 years ago
By inspecting the source code, I am not sure that after session_regenerate_id() run, the original session data does not destroy (still keeps at the system) that sniffers still hijack by applying original session identifier.

In addition, I find that if user-level session storage handler is used. session_regenerate_id() does not work.
up
-6
php at 5mm de
20 years ago
This feature seems to create a new session ID without clearing the old session data. This is a very important feature for security validation:

$usedns = TRUE; // for eliminating failture by proxys using IP chains, but slower

$useragent = getenv("HTTP_USER_AGENT");
$host = getenv("REMOTE_ADDR");
$dns = $global['dns'] ? @gethostbyaddr($host):$host;

session_start();

if(session_is_registered('securitycheck')) {
if(
(($_SESSION['session']['host'] != $this->host) && !$usedns)
|| ($_SESSION['session']['dns'] != $this->dns)
|| ($_SESSION['session']['useragent'] != $this->useragent)
) {
session_regenerate_id();
session_unset();
}
} else {
$currentdata = array();
$currentdata['host'] = $this->host;
$currentdata['dns'] = $this->dns;
$currentdata['useragent'] = $this->useragent;

session_register('securitycheck', $currentdata);
}

If sombody steals an active SID (e.g. by referrer or injection attack), he can?t be validated because of either the host / dns or useragent and will get a new (empty) SID, without interrupting the original session.

Please mail me for any comments: php at 5mm de
up
-14
Ben Johnson
13 years ago
To "start a new session", try the following:

<?php
session_start
();
session_regenerate_id();
session_destroy();
unset(
$_SESSION);
session_start();
?>
up
-4
Alamin
5 years ago
In the second example provided by php.net, should it call my_session_start inside the session regenerate method instead of directly calling session_start? I think it is an error.
To Top