CakeFest 2024: The Official CakePHP Conference

reset

(PHP 4, PHP 5, PHP 7, PHP 8)

resetУстанавливает внутренний указатель массива на первый элемент

Описание

reset(array|object &$array): mixed

Функция reset() сдвигает внутренний указатель массива array на первый элемент и возвращает значение первого элемента массива.

Список параметров

array

Входной массив.

Возвращаемые значения

Возвращает значение первого элемента массива или false, если массив пуст.

Внимание

Функция возвращает как логическое значение false, так и нелогическое значение, которое приводится к false. Прочитайте раздел «Логический тип», чтобы получить дополнительную информацию. Используйте оператор === для проверки значения, которое возвращает функция.

Список изменений

Версия Описание
8.1.0 Вызов функции на объекте (object) объявлен устаревшим. Объект (object) либо сначала преобразовывают в массив (array) функцией get_mangled_object_vars(), либо пользуются методами класса, в котором реализовали интерфейс Iterator, например, ArrayIterator.
7.4.0 Экземпляры классов библиотеки SPL теперь обрабатываются как пустые объекты, у которых нет свойств, вместо вызова метода интерфейса Iterator с тем же именем, что и у этой функция.

Примеры

Пример #1 Пример использования функции reset()

<?php

$array
= array('первый шаг', 'второй шаг', 'третий шаг', 'четвёртый шаг');

// По умолчанию указатель указывает на первый элемент
echo current($array) . "<br />\n"; // "первый шаг"

// Пропускаем два шага
next($array);
next($array);
echo
current($array) . "<br />\n"; // "третий шаг"

// Сбрасываем указатель, снова начинаем с первого шага
reset($array);
echo
current($array) . "<br />\n"; // "первый шаг"

?>

Примечания

Замечание: Возвращаемое значение для пустого массива неотличимо от значения в случае массива, значение первого элемента которого равно логическому (bool) значению false. Чтобы правильно проверить значение первого элемента массива, который содержит значение false, сначала функцией count() проверяют количество элементов в массиве или после вызова функции reset() проверяют, что ключ, возвращаемый функцией key(), не равен значению null.

Смотрите также

  • current() - Возвращает текущий элемент массива
  • each() - Возвращает текущую пару ключа и значения массива и сдвигает указатель на одну позицию вперёд
  • end() - Устанавливает внутренний указатель массива на последний элемент
  • next() - Сдвигает внутренний указатель массива на одну позицию вперёд
  • prev() - Сдвигает внутренний указатель массива на одну позицию назад
  • array_key_first() - Получает первый ключ массива

add a note

User Contributed Notes 13 notes

up
3
turabgarip at gmail dot com
2 years ago
Since reset() returns the first "value" of the array beside resetting its internal pointer; it will return different results when it is combined with key() or used separately. Like;

<?php

$products
= array(
'biscuits' => array('biscuit1' => 'cobis', 'biscuit2' => 'probis'),
'chocolates' => array('coco1' => 'cococ', 'coco2' => 'prococ'),
);

echo
key(reset($products['biscuits'])); // Fatal error

reset($products['biscuits']);
echo
key($products['biscuits']); // Will print 'biscuit1'

?>

This is perfectly normal because in the first method, reset() returned the first "value" of the 'biscuits' element which is to be "cbosi". So key(string) will cause a fatal error. While in the second method you just reset the array and didn't use a returning value; instead you reset the pointer and than extracted the first key of an array.

If your array has more dimensions, it won't probably cause a fatal error but you will get different results when you combine reset() and key() or use them consecutively.
up
54
milo at mdlwebsolutions dot com
11 years ago
GOTCHA: If your first element is false, you don't know whether it was empty or not.

<?php

$a
= array();
$b = array(false, true, true);
var_dump(reset($a) === reset($b)); //bool(true)

?>

So don't count on a false return being an empty array.
up
8
Bartek Ferek
7 years ago
As for taking first key of an array, it's much more efficient to RESET and then KEY, rather then RESET result of ARRAY_KEYS (as sugested by gardnerjohng at gmail dot com).

<?php
reset
($someArray);
echo
key($someArray);
?>

This will give the same result but is much much faster. Larger arrays, better performance. Tested on 100-elements long array with 16 times faster results.
up
3
arne dot ludwig at posteo dot de
8 years ago
In response to gardnerjohng's note to retrieve the first _key_ of an array:

To retrieve the first _key_ of an array you can use the combination of reset() and key().

<?php
$properties
= array(
'colour' => 'grey',
'flavour' => 'rubber',
'name' => 'Mouse Ball',
'texture' => 'rubbery'
);

reset($properties);
echo
key($properties); // => 'colour'
?>

I prefer this solution as you don't have to create the keys array. This should (not measured) improve performance on large arrays.
up
7
Alexandre Koriakine
18 years ago
Also it's good to reset this way the multidimentional arrays:

reset($voo2['moder']);
while (list($key, $value) = each ($voo2['moder'])) {

reset($voo2['moder'][$key]);
while (list($key1, $value1) = each ($voo2['moder'][$key])) {
#do what u want
}

}
up
5
leaetherstrip at inbox dot NOSPAMru
19 years ago
Note that reset() will not affect sub-arrays of multidimensional array.

For example,

<?php
$arr
= array(
1 => array(2,3,4,5,6),
2 => array(6,7,8,9,10)
);

while(list(
$i,) = each($arr))
{
echo
"IN \$arr[$i]<br>";

while(list(
$sub_i,$entry) = each($arr[$i]))
{
echo
"\$arr[$i][$sub_i] = $entry<br>";
}
}

reset($arr);

// Do the same again
while(list($i,) = each($arr))
{
echo
"IN \$arr[$i]<br>";

while(list(
$sub_i,$entry) = each($arr[$i]))
{
echo
"\$arr[$i][$sub_i] = $entry<br>";
}
}
?>

will print

IN $arr[1]
$arr[1][0] = 2
$arr[1][1] = 3
$arr[1][2] = 4
$arr[1][3] = 5
$arr[1][4] = 6
IN $arr[2]
$arr[2][0] = 6
$arr[2][1] = 7
$arr[2][2] = 8
$arr[2][3] = 9
$arr[2][4] = 10
IN $arr[1]
IN $arr[2]
up
5
Mladen Janjetovic
10 years ago
Note that you can't use pointer here. It will reset the iteration counter in this case.
foreach($array as $key=>&$value) {...}


Use standard foreach instead
foreach($array as $key=>$value) {...}
up
2
arne dot slabbinck at duo dot be
8 years ago
Info:

Following code gives a strict warning in 5.4.45

return reset(array_keys($result['node']));

"Strict warning: Only variables should be passed by reference"

So should be:

$keys = array_keys($result['node']);
return reset($keys);
up
2
kendsnyder at gmail dot com
14 years ago
Don't use `reset()` to get the first value of an associative array. It works great for true arrays but works unexpectedly on Iterator objects. http://bugs.php.net/bug.php?id=38478
up
1
m dot lebkowski+php at gmail dot com
17 years ago
Colin, there`s a better (IMO) way to solve your problem.
<?
// ...
foreach($a as $k => &$d){} // notice the "&"
// ...
?>
It`s a new feature in PHP5 to use references in foreach loop. This way PHP isn`t making a copy of the array, so the internal pointer won`t be reset.
up
0
Colin
17 years ago
I had a problem with PHP 5.0.5 somehow resetting a sub-array of an array with no apparent reason. The problem was in doing a foreach() on the parent array PHP was making a copy of the subarrays and in doing so it was resetting the internal pointers of the original array.

The following code demonstrates the resetting of a subarray:

<?
$a = array(
'a' => array(
'A', 'B', 'C', 'D',
),
'b' => array(
'AA', 'BB', 'CC', 'DD',
),
);

// Set the pointer of $a to 'b' and the pointer of 'b' to 'CC'
reset($a);
next($a);
next($a['b']);
next($a['b']);
next($a['b']);

var_dump(key($a['b']));
foreach($a as $k => $d)
{
}
var_dump(key($a['b']));
?>

The result of the two var dumps are 3 and 0, respectively. Clearly the internal pointer of $a['b'] was reset by doing the foreach loop over $a.

Each time the foreach loop iterated over the 'a' and 'b' keys of $a it made a copy of $a['a'] and $a['b'] into $d which resetted the internal pointers of $a['a'] and $a['b'] despite making no obvious changes.

The solution is instead to iterate over the keys of $a.

<?
foreach(array_keys($a) as $k)
{
}
?>

and using $a[$k] (or creating an alias of $a[$k] as $d and dealing with the consequences of using aliases).

For the curious, I was implementing the Iterator interface on a dummy object and calling a global object to do the actual iteration (also to cope with PHP's lack of C-style pointers which when doing a $a = $b on objects would cause the data in $a to be inconsistent with the data in $b when modified). Being that I had many dummy objects representing different data sets I chose to store each data set as a subarray contained within the global object. To make this work each dummy object has to store a key (which can freely be duplicated without problems) that it passes to the global object when rewind, key, current, next, and valid were called on the dummy object.

Unfortunately for me, my key required to be more than just a simple string or number (if it was then it could be used to directly index the subarray of data for that object and problem avoided) but was an array of strings. Instead, I had to iterate over (with a foreach loop) each subarray and compare the key to a variable stored within the subarray.

So by using a foreach loop in this manner and with PHP resetting the pointer of subarrays it ended up causing an infinite loop.

Really, this could be solved by PHP maintaining internal pointers on arrays even after copying.
up
-6
gardnerjohng at gmail dot com
9 years ago
If you need an easy way to retrieve the first *key* in an array (instead of the value), it can be done like this:

<?php
$properties
= array(
'colour' => 'grey',
'flavour' => 'rubber',
'name' => 'Mouse Ball',
'texture' => 'rubbery'
);

# Will output "colour".
echo reset(array_keys($properties));
?>
Potentially helpful for configuration files that define a sequence of items as an associative array.
up
-20
Anonymous
18 years ago
I wrote a nice function, which rotates values of array. Very useful for table rows where you have to rotate colors

<?php
function rotate(&$array) {
$item = current($array);
if (!
next($array)) reset($array);
return
$item;
}
?>
To Top